For many people, their own garden is a small oasis and with the right decoration, it provides relaxation. This decoration was cast in concrete, decorated with mosaic and refined with gold leaf. In no time at all, you will be able to create a harmonious ambience.
Stir the concrete withwater to a creamy mass and pour it into the various casting moulds. The casting mould "Ellipse" should be filled in advance with Release agent spray can be sprayed. For the casting moulds you need the following quantities of concrete: Ellipse small 12 tablespoons, ellipse large 24 tablespoons, Buddha 8 tablespoons and stones 10 tablespoons. After 24 hours drying time you can take the castings out of the mould. If necessary, you can remove unclean edges with Sandpaper smooth it out
Coat the edges of the "Ellipse" castings with mosaic glue, then graduallyMosaic stones on top and grout the whole thing with Joint Filler. To do this, mix something Joint Fillerwith water and spread it between the stones with a soft brush. After approx. 8-10 minutes of binding time, you can wipe off the remaining Joint Filler stones with a damp sponge. Glue the two castings "Ellipse" on top of each other with assembly adhesive
Provide the Buddha with gold leaf. Coat the object with Leaf metal Gold leaf priming milkplace a sheet Leaf metal on the coated surface and press with a Bristle brushes all tight. The decorated surface should be allowed to dry for at least 24 hours before being painted over Leaf metal with the finishing varnish. If desired, you can accentuate the mosaic stones with gold leaf
Even the self-cast stones can be decorated with mosaic and muggle stones. The dried mosaic is finally painted with joint finish.