Cute Mould "Bunny family" with two figures in different sizes. The forms measure a depth of approx. 3.0 cm each. The larger rabbit measures approx. H 15.0 x W 8.5 cm and the smaller rabbit measures approx. H 12.0 x W 7.0 cm. This Casting mould is particularly suitable for creative-Casting compound or concrete. The moulds have a total capacity of approx. 370 ml.
Create beautiful spring-like decorations with the cute bunnies. After curing, the concrete can be Napkin technique to be beautified. Please note that the substrate must first be Acrylic paint primed with white primer. For decorating, however, also colors, as for example, IAcrylicnca gold or Effect paint and glitter can be used. Create beautiful figures for Easter decorations in no time at all
Tips to use:
Preparations:
Mix the desired casting compound according to the instructions. If you wish, you can color it with color pigment powder.
Application:
Slowly pour the mixed casting compound into the casting mould. Leave a rim of at least 2 mm free to make it easier to demould your casting later.
Gently tap the casting mould so that the mixture is evenly distributed and any air bubbles come to the surface. You can then prick these with a lace object.
Time to dry::
Allow the casting compound to harden well. Follow the drying times specified in the instructions for the casting compound.
Work to finish:
You can now demould your casting. If the casting does not come off simply by dropping it, you can carefully loosen the mould all around with your fingers and tap it against the mould.
Good to know:
For detailed moulds, we recommend using a mould release agent or release wax to protect the mould.