Stick candle holder or coaster with glass stones:
Mix approx. 3 tablespoons of Raysin with water to form a creamy mixture. Add a few glass stones to the mixture and stir again vigorously. Pour the mixture into the silicone casting mould and tap it several times on the surface so that the air bubbles rise. After approx. 1 hour, you can carefully remove the casting from the mould. Moisten the sandpaper and sand the casting until the glass stones are clearly visible.
If your stick candle is too large in diameter, you can sharpen it with a candle sharpener. To hold the candle firmly in place, place a small wax stick in the bottom of the mould.
